Pre-Trip Inspection

Learn how to properly inspect a vehicle for safety and compliance. This test checks if you know what to look for before driving. Practice the inspection steps and get feedback. You’ll be prepared for test day.

Pre-Trip Inspection Quiz

Airlines are green and black in color.(Required)
__________ is red in color.(Required)
Tension Springs are attached to the trailer.(Required)
Where are the clearance lights located on the front of the trailer?(Required)
What color is the service line?(Required)
_________: Secured around the kingpin and not broken.(Required)
____________ refers to the specified amount of electric current that is produced and carried by the wires.(Required)
How many points of contact are there to enter the truck?(Required)
When is “the friction point?”(Required)
The Drive shaft is located behind the cabin under the tractor frame.(Required)
Airlines should be ______________(Required)
When switching from neutral to any gear, you do not have to press on the clutch.(Required)
When performing Fan Down 2 test, which brake knob pops out first?(Required)
The oil level should be above the minimum.(Required)
Coolant makes sure that what is cooled?(Required)
How is the alternator driven?(Required)
Fan Down 1 test checks:(Required)
How many spare fuses should be in the truck?(Required)
The clutch is composed of ___________ major parts.(Required)
What are the U-Bolts secured to?(Required)
What is the color of the reverse light?(Required)
How many functions does the inside taillights have?(Required)
For the pre-trip brake check, which is the 3rd brake maneuver?(Required)
What is the purpose of side marker lamps and reflectors?(Required)
The water pump is gear-driven.(Required)

Name(Required)